F7960 Series
Description
X-axis travel in(mm)
Y-axis travel in(mm)
Z-axis travel in(mm)
X – rapid traverse ipm(m/min)
Y – rapid traverse ipm(m/min)
Z – rapid traverse ipm(m/min)
Table Size
(length × width)
Spindle RPM (opt)
Spindle Power hp (kW)
–
Spindle Power (opt)
ATC Capacity (opt)
Spindle Taper
F960M
96.5 (2,450)
37.4 (950)
33.5 (850)
630 (16)
631 (16)
787 (20)
106.3 x 37.4
(2,700 × 950)
8,000
–
29.5/24.8 (22/18.5)
–
20 (30)
BBT#50
F960MH
96.5 (2,450)
37.4 (950)
33.5 (850)
630 (16)
631 (16)
788 (20)
106.3 x 37.4
(2,700 × 950)
12,000
40.2/33.5
(30/25)
29.5/24.8 (22/18.5)
20 (30)
BBT#50
- Built-In Spindle
A standard built-in cartridge type spindle is ideal for mold manufactures. The high torque is also suitable for a wide variety of heavy machining applications.
Box Guide Way All Guideways are hardened & ground, wide box type for unsurpassed long-term rigidity and accuracy.
- AIR Semi-Rising Slide Way
By adapting the “semi-rising sliding ways” the load on the Z-axis slide way is decreased. By dramatically decreasing the slide way load the Z-axis is able to hold tolerance and repeatability over longer cycle times. Lubricating device
- An automatic, centralized lubrication system supplies the optimal amount of lubricating oil to each axis. Spindle thru Coolant
Through the spindle coolant is available. This is particularly useful for deep hole drilling and helps increase tool life and decrease cycle time.
- HW-MP I
To aid in the machining of molds, the Hyundai WIA Mold package is applied as a standard and ensures accurate and high quality surface finishes and contouring.
Get More Info: Machines
More Hyundai-Wia: Vertical Machining Centers
- Vertical Machining Center Hyundai-Wia F400
- Vertical Machining Center Hyundai-Wia F400VM
- Vertical Machining Center Hyundai-Wia F410D
- Vertical Machining Center Hyundai-Wia F500
- Vertical Machining Center Hyundai-Wia F500D
- Vertical Machining Center Hyundai-Wia F500VM
- Vertical Machining Center Hyundai-Wia F510B
- Vertical Machining Center Hyundai-Wia F510M
- Vertical Machining Center Hyundai-Wia F600D
- Vertical Machining Center Hyundai-Wia F650
- Vertical Machining Center Hyundai-Wia F650VM
- Vertical Machining Center Hyundai-Wia F660M
- Vertical Machining Center Hyundai-Wia F700
- Vertical Machining Center Hyundai-Wia F750
- Vertical Machining Center Hyundai-Wia F960
- Vertical Machining Center Hyundai-Wia HI-MOLD450
- Vertical Machining Center Hyundai-Wia HI-MOLD560
- Vertical Machining Center Hyundai-Wia i-CUT380M
- Vertical Machining Center Hyundai-Wia i-CUT380T
- Vertical Machining Center Hyundai-Wia i-CUT420