HYUNDAI-WIA 2013 CNC PALLET CHANGER VERTICAL MACHINING CENTER MODEL F500D (C-Frame Type) WITH Fanuc 0i-MD

TABLE CAPACITY

Table Size (Top Place) Maximum Weight
Height to table top from ground

TRAVEL

X-Axis (Longitudinal)
Y-Axis (Cross)
Z-Axis (Vertical)
Distance from table surface to spindle nose

SPINDLE

Spindle Taper
Spindle Motor Power (30 min/Cont.) Spindle Speed
Spindle Torque Max.
Spindle Driven
Spindle Bearing Diameter (Front) Spindle Cooling
Full Power Range

FEEDRATE

Rapid Travel “X / Y ” 40 m/min (1,575 ipm)
Rapid Travel “Z ” 30 m/min (1,181 ipm)
Maximum Cutting Feed-rate 10 m/min (394 ipm)
Guide way “X / Y” LM Guide
Guide way “Z” Squire Guide
Axis Drive Motor X / Y 4.0 kW (5.3 Hp)
Axis Drive Motor Z 4.0 kW (5.3 Hp)

AUTOMATIC TOOL CHANGER

Tool Type CAT 40 (Std.)
Tool Capacity (Magazine) 30 Tools
Maximum Tool Length 300 mm (11.8”)
Maximum Tool Diameter Φ 90 / 150 mm (3.5 / 5.9”)
Maximum Tool Weight 8 kg (17.6 lbs)
Tool Change Time (tool to tool / chip to chip) 2.1 / 4.5 seconds
ATC Method Twin arm by roller geared cam

MACHINE SIZE

Length x Width 2,930 x 2,710 mm (115.4” x 106.7”)
Machine Height 2,852 mm (112”)
Machine Weight 9,500 kg (20,944 lbs)
Power Consumption 35 KVA
Voltage 220V ± 5% (3 Phase), 60 Hz

CNC

CNC Fanuc 0i-MD
CRT 8.4” Color TFT
Memory Capacity 1,280M (4,200 ft)
Programming G-Code (Graphic display-opt)

• CNC – FANUC 0i-MD
  – 8.4” Color Monitor
  – 1280 M (4,200 ft) Memory Capacity
• Rigid Tapping (Max 4,000 rpm)
• Spindle Through Coolant with 20 kg/cm2 (285 psi)
• Swing OP-Panel & Remote M.P.G. for easy operation
• Complete Coolant System (300 liter / 79 gallon Tank Capacity)
  – 0.4 kW(0.5 Hp) Pump for Bed Flushing, 0.4 kW(0.5 Hp) Pump for Flood
• Standard Work Light (1 colour)
• Full Closed Splash Guarding
• Front Door Interlock

• Work Counter B
• Hydraulic Supply System (3 ports x 2)
• Spindle Taper Air Blow During Tool Change
• Hydraulic Unit (60 liter, 2.2 KW, 45 kg/cm2)
• Machine Arranged for 220v + 5%, 60 Hz volt operation
• Foundation Kit
• Manuals: one (1) each:
  – Programming
  – Operating (including tooling, maintenance)
  – Electric circuit diagrams
  – Parts List